What do you get in the Ultimate CNC RS232 Communications Cable Kit?
- CNC RS232 Cable 10ft RS232 cable to go from serial port to machine tool, setup for XON/XOFF handshaking for maximum compatibility with machine tools and easy setup of RS232 software. A02b-0200-K814 . Will work on most machines except the older CNC's in which require specifically hardware handshaking. (see custom cable to build to your print)
- USB to serial port adapter (Tested and fully compatible with new and old laptops) This provides you with a port from your computer to attach the RS232 cable to.
- RS232 Mini Tester with LEDs for troubleshooting RS232 cables and communications problems
- RS232 Software- Our 60 day TRIAL of DNC4U available for download.
- Connectors on cable DB9 female and DB25 male (see picture below)
See above links for more information on each of the products above for single purchase pricing.
Talk to our RS232 Specialist - (414) 973-2339
SAVE by purchasing all of them together in this Ultimate CNC RS232 Communications Cable Kit for machinery RS232 communications - A02b-0200-K814.
Windows version compatibility
- 98SE
- 2000
- XP (32bit/64bit)
- Vista (32bit/64bit)
- Windows 7, 8, 10, 11 (32bit/64bit)
- MacOS 8.6, 9.x and X
- REDhat 7.3-9
- If the version you have is newer please contact us as site may not be up to date.
*** DRIVER SOFTWARE DOWNLOAD REQUIRED FOR THE USB TO SERIAL CONVERTER ***
Download the latest USB to Serial Adapter device driver here.
NOTE: This device uses virtual COM ports and on occasion some RS232 software does not utilize USB to serial converters properly. In which case there is a 60 Day TRIAL of DNC4U available for download for you to test with to determine if your software is the problem. Predator software that comes with BOBCad may or may not work with this converter.
30 day warranty, installation support and setup - Talk to our RS232 Specialist - (414) 973-2339
*** 1.) Read about Drip feeding applications - They are not supported with the USB to serial adapter, however the RS232 cable will support dripfeeding if needed using a true serial port. These USB to serial converters are recommended for machines in which you need to transfer a program into the machine memory, then run the program from the machine memory - Not dripfeeding.
