Use this CO-AX dial indicator to quickly center work pieces or fixtures on your mill as well as for aligning turrets by finding true center of a boring pocket. No walking around the machine necessary, no mirrors required. Coaxial indicator dial remains stationary while the machine spindle rotates. Exact chucking not needed. Operates at any angle from horizontal to vertical without any change, and from internal to external by simply changing the feeler. With so much Coaxial indicator travel either way you can dial a hole or diameter in a matter of seconds.
CO-AX Indicator Specifications:
- Case with foam padding
- Restraining Rod for gauge
- Centerpoint feeler - The Centering Indicator provides a simplified method for centering a workpiece or fixture on horizontal or vertical machines, external or internal diameters.
- The measuring range is 0.25 in.
- Mounting shank is 0.375 in. diameter and 0.75 in. long.
- The indicator is 5.5 in. long from the top of the shank to the bottom of the tip holder (the black part). Can measure internal diameters from 0.12 in. to 4.25 in. and external diameters from zero to 4.25 in. with various tips to maximum diameter of 12 in..
- This set includes: Indicator body, restraining rod (prevents rotation), spring-loaded center point feeler, three straight feelers of various length (for IDs), three curved feelers of various length (for ODs).
- Feeler Ball: 1/8 in. Dia.
- Locating Accuracy: to within .0002 in. of true center
- It is recommended that you do not exceed 800 RPM. Preferably to not exceed 100RPM.
This dial indicator is not to be used as a measuring indicator. It is a centering indicator.
This indicator is of a high quality unlike many of the cheap ones that have the indicator tip screws stripping out as well as other issues. This is similar to the blake coaxial indicator, but for half the price.
