Tosoku RS400 Multi Deck Rotary Switch (30 Degree Step, shorting)

Tosoku RS400P4410BP3016R Series Rotary Switch 4 decks, Up to 11 positions, 4 poles, shorting, 30 degree step angle (built to spec)

Buy Tosoku RS400 series switch with 30-degree step angle and all 4 terminal decks in case you need to use 1,2,3 or 4 of them for your machine. This RS400 Tosoku switch is the Shorting version. We can tailor your Tosoku RS400 switch to match several different configurations depending on your specific application. Provide us with a complete part number and/or select the desired Start and End Position(s) below and we do the rest. You may also ship your switch to us to determine proper one needed if necessary.

Shorting – The switch will momentarily “short” position 1 and 2 together when rotating from position 1 to position 2. This type of contact is sometimes referred to as “make before break.”

Non-shorting – The connection is momentarily broken when rotating from position 1 to position 2. This type of contact is sometimes referred to as “break before make.”

DOWNLOAD THIS PDF - TO HELP DETERMINE YOUR SWITCH TYPE

Common Tosoku RS400P4410BP3016R rotary switch applications:

• Feed rate override switch
• Mode selection switch
• Axis rotary switch
• Turret index position switch

If you have any questions, or are having difficulty finding the switch you need, please CALL US.

Make sure your switch has the following before checking out with RS400 series items in the store.

• Starts with RS400P or RS400N.
• Has the number 60 (60 degree step angle) or 30 (30 degree step angle) designation in the part number.
• Start Stop position may vary with Maximum of 5 or 11.
• Has the B (shorting) or A (non-shorting) designation in the RS400 part number.
• If your switch does not have 4 decks and has 1,2 or 3 decks, this switch will work as long as there is clearance in the enclosure. Most enclosures have plenty of room to fit the extra length.

The part number on the switch may vary from the actual switch being replaced. Make sure to move the set screw(s) to the same position(s) as the switch you are replacing.

Specifications Data Sheet

Depth Dimensions

• 1 Deck - 22mm
• 2 Decks - 32mm
• 3 Decks - 42mm
• 4 Decks - 52mm

Shaft Diameter - 6mm

We try to stock RS400 series switches of each type. If not in stock, there is a 60 day lead time from Japan. Call us to check stock and specific configuration.