MR190 MPG - User Accessible DIP Switches
MR190 Universal MPG Handwheel
- Voltage: 5 or 12V DC
- Output Resolution: 100 PPR
- Diameter of metal dial 70mm or 2.75in.
- A.B Phase Output: A/A'/B/B' differential line driver and A/B pull-up outputs
Click here for Specifications, dimensions and dip switch settings
The MR190 is a manually controlled rotary handwheel for use on CNC machine tools. Micron MR 190 Universal Manual Pulse Generator/Handwheel (MPG) is the world's first MPG to offer both A/A'/B/B' differential line driver and A/B pull-up quadrature outputs in a single unit. Now a CNC machine manufacturer, control panel fabricator, distributor or service center no longer needs to stock 3 or more handwheel models because of different interface requirements for different manufacturers and models of CNC systems, PLCs and teach pendants.
The MR190's user-accessible DIP switches can be used to configure both power supply options (+5V or +12VDC)and A/B pull-up interface options (either Standard 2K ohm ortype 330 ohm pull-up resistors) It is also the first handwheel to offer a modern, efficient industrial connection scheme. The heavy duty unit incorporates a metal housing, metal knob and is rated IP50 (dust protected).
The following Manual Pulse Generators / Handwheels are replaced by the MR190 Universal MPG
- ESM60 (+5-12V, A/B Standard 2KΩ or 330Ω pull-up outputs)
- ESM64 (+5V, A/A'/B/B' RS422 line driver outputs)
- ESM70 (+5V, A/B Standard 2KΩ or 330Ω pull-up outputs)
- ESM74 (+5V, A/A'B/B' RS422 line driver outputs)
- ESM80 (+5-12V, A/B Standard 2KΩ or 330Ω pull-up outputs)
- ESM84 (+5V,A/A'/B/B' RS422 line driver outputs)
Click here for Specifications, dimensions and dip switch settings for the MR190
