Need a replacement PCS350 broken tool sensor head? This is a wand style Positive Contact Sensor replacement unit for a tool broken detection system. Includes needle, and complete swing arm assembly. Does not come with Cable or Controller.
Download the Instruction manual for interfacing, operation, troubleshooting.
This unit comes with a 2 Year Warranty from the Date of Purchase
If you would like to discuss your application and interfacing with an engineer please call us!
Example PCS100 Tool Broken CNC photos, setup and installation-Click here
Applications:
- Detect Broken Drills, Taps, Reamers, Chipped Inserts or any other tool.
- Detect chip build up on tools
- Detect wrong tool called up in program
- Detect a part loaded in chuck properly
- Detect part ejected from chuck properly
PCS-350 Tool Broken Detect Features
- Teaching of up to TWO Master Positions
- Object Presence Monitoring
- Anodized Aluminum Body
- 0-355 degree electronically learned swing range. Complete diagnostic system
- Permanent Magnet Synchronous Motor or (PMSM), fitted with its own Integrated Drive System
- CW or CCW swing direction by selector switch
- Checking window tolerance of ±2 or ±6 Degrees (Switchable)
- Completely sealed against liquid and solid contaminants. IP 67 rating.
- Maxi Life needle in standard or special length
Standard: 140 mm (5.5 in.)
- 90 degree or straight, molded 5 pin connector/cable
Cable lengths to 75m (246ft)
Standard length is 5m (16ft)
- Micro tool and micro drill sensor capability
- Slim Profile of just 25mm
Legacy Mode Feature - This allows users to take advantage of a simple mode of operation (as it is for the PCS-100) where it is not necessary to teach a position but instead you just monitor presence or absence within a specific swing angle (much like it is for the PCS-100), however, this angle can be easily changed electronically. Also, the swing angle of the Sensor it is not limited to 170° or so (as it is on the PCS-100) but instead you can go about 350° on either the PCS-350 or the PCS-ER+
Variable Tolerance Feature - The PCS-350 and the PCS-ER+ NOW also offer Variable Tolerance of the detecting angle from ±1° to ±20°. This is particularly useful when trying to monitor different tool diameters within the same setting and want to avoid getting false positive feedback from the sensor.
