Questions or Inquiries
If you have any questions or need further information about our Manual Pulse Generators, please don't hesitate to contact our dedicated MPG Specialist at (608) 416-1569.
Frequently Asked Questions (FAQ)
(Click to expand Answers)
What is an MPG | Manual Pulse Generator?
Q: What is a Manual Pulse Generator (MPG)?
• A: MPGs are handwheel devices used to precisely control CNC machines. (expand)
Manual Pulse Generators allow operators to operate CNC and other computer aided machining
- Jogging axes
- Selecting speeds
- Setting precise positions
- Enabling staging and tool changes
- Performing manual overrides
They are essential for tasks requiring fine control.
Q: What are some other names for Manual Pulse Generators | MPGs?
• A: MPGs go by many names, hera is a list of common names you might refer to an MPG as (expand)
| Jog Wheel |
Axis Control Wheel |
Manual CNC Controller |
Rotary Encoder |
| Jog Pendant |
Manual Axis Selector |
CNC Axis Selector |
Multi-Axis Handwheel |
| Handwheel |
CNC Positioning Wheel |
Machine Jog Wheel |
CNC Jogging Device |
| Electronic Handwheel |
Manual Incremental Generator |
Axis Jog Controller |
Precision Handwheel |
| CNC Handwheel |
Feed Rate Adjuster |
CNC Control Pendant |
Pulse Generator Pendant |
| Encoder Wheel |
Incremental Encoder Wheel |
Remote Pendant |
Pendant Control Unit |
| Manual Jog Wheel |
Modular Handwheel |
Remote Hand Controller |
CNC Jog Pendant |
| MPG Handwheel |
Feed Rate Controller |
Remote Hand Pendant |
Rotary Pulse Coder |
| CNC Handwheel Pendant |
G Code Pendant |
Machine Setup Wheel |
Feed & Speed Adjuster |
Q: What Brands and Manufacturers do you deal with?
• A: We stock Tosoku MPG, but have also worked with the following for OEM and replacement (expand)
| Tosoku - In stock and can ship today! |
| Future Life |
Hwacheon |
Nemicon |
Fanuc |
| Siemens |
Mitsubishi |
Yumo |
Delta Electronics |
| Micronor |
Omron |
Panasonic |
Heidenhain |
| Heitec |
Hiteco |
World Encoders |
Cayo Sensors |
| HK Affinity |
Round |
Euchner |
Sumtak |
| and more, if you don’t see yours listed, just ask! |
Q: What is the typical cost of an MPG?
• A: MPG costs start at about $650 and up (expand)
Total cost is based on many factors such as layout, switches, connectors.
If you need a quote for your unit, please reach out to our MPG Specialist directly:
(608) 416-1569.
Q: What is the typical lead time of an MPG?
• A: We STOCK a variety of Tosoku MPGs (expand)
Most of our Tosoku MPG are IN-STOCK and can SHIP TODAY
Lead times for other manufacturers can vary.
If you need a quote for your unit, please reach out to our MPG Specialist directly:
(608) 416-1569.
How do I order the CORRECT MPG for my machine?
Q: How do I verify compatibility for my CNC machine?
• A: Use our spec verification form to ensure compatibility. (expand)
You can request the verification form from our team Here
Be sure to complete the second page, and include detailed images of the inside and outside of your pendant.
inlude this form and your images in an email to our MPG specialist as noted on form.
Or you can give us a call to start the discussion at (608) 416-1569
I found the Exact Model I need on your site, can I just order it?
• A: Yes, but we still need to verify some details. (expand)
Because MPGs can have so many variations, we will reach out with our verification form just to be sure we can support you in your purchase.
You will be asked to complete our verification form before release.
Q: My machine has a unique <Item/Feature> can you supply an MPG to do this?
• A: Yes, we can usually add or modify our stock units to match your exact specifications. (expand)
You can request the verification form from our team Here
Once returned we can determine which components need to be added or modified on your unit.
Or you can give us a call to start the discussion at (608) 416-1569
What modifications can you make to a stock MPG?
• A: Here is a short list of modifications we can complete in house. (expand)
- Add Buttons (E-Stop, Enable, Deadman)
- Adjust stop points (zero, axis and multiplier settings)
- Swap encoders (5V/12V 25PPR/100PPR)
- Swap coding (PtP, 01Bin, 03Gry)
- Adjust wiring (inline, signal, NO/NC)
- Custom wiring diagram
- Custom Part numbers (for machine manufacturers and large orders)
Do you repair damaged units or sell replacement parts?
Q: What repair services do you offer?
• A: We service many types of MPG and offer a variety of services (expand)
| We offer the following repairs and services: |
We DO NOT offer the following repairs: |
- Analyze Configuration for Replacement
- Switch Replacement
- Encoder Replacement
- Add buttons (E-Stop, Enable, Deadman, etc)
- Continuity Testing and Tracing
- Wiring Schematic Assistance
- Assist in mating new connectors (see right)
- General troubleshooting
- Creating NEW models for Machine Manufacturers to spec
|
- Damaged plugs and connectors (we will replace, but wont install)
- Circuit on board repair (there are too many liabilities on board)
- Internal Component repair (such as inside a switch, or encoder)
- Attach new cable to existing MPG
|
Q: Can you repair MY Specific Manual Pulse Generator?
• A: Thats a complicated question and on a case by case basis (expand)
While many issues can be solved with replacement parts, there are many troubleshooting steps that can be attempted to resolve issues as well.
Every MPG issue is unique, and to list all of the possible repairs that could be done would be exhaustive.
Call our MPG Specialist at (608) 416-1569. We're happy to assist with any questions
Q: Do you sell replacement cables for MPGs?
• A: Yes, we stock standard and custom cable lengths. (expand)
We offer a variety of cable options, including Tosoku-approved replacements.
Call us for availability and compatibility checks.
You can see our STOCK listing here: MPG CABLES IN STOCK
Q: Do you sell replacement parts for MPGs?
• A: Yes, we stock a variety of switches, encoders, and spare parts for MPGs. (expand)
Replacement and Addition of
- Switches
- Encoders
- Handles
Advantages: Why Choose CNC Specialty Store and Tosoku?
Q: Why choose Tosoku MPGs from CNC Specialty Store?
• A: We sell Authorized products include troubleshooting and installation support. (expand)
Unlike knock-offs, the Tosoku MPGs we sell are high-quality, reliable, and include professional troubleshooting assistance during installation. (US phone based)
**Beware of imitations on eBay or unauthorized sellers.**
Q: Do you offer Bulk Pricing?
• A: Yes, we offer quantity pricing on units starting at 5 pieces. (expand)
We can offer significant discounts to OEMs, tool makers, and others who need repeated MPG solutions.
Q: Do you offer Discounts for OEM or Machine Builders?
• A: YES, please contact us for bulk pricing on your new applications. (expand)
We offer significant discounts to OEMs, Tool Makers, and others who require a customized and repeatable solution.
Q: Do you offer a Warranty?
• A: Tosoku MPGs come with a standard one-year warranty. (expand)
We back our prodcuts and stand by our work in supprting your installation.
If you have a specific issue, reach out and ask us directly.
Q: What if I still have questions?
• A: Call our MPG experts at (608) 416-1569.
We're happy to assist with any questions about compatibility, installation, or troubleshooting.
