RS232 Cable for CNC machines, Fanuc-Mitsubishi (Fully tested!)

Looking to buy a CNC RS232 cable that is fully tested on many types of CNC machines and equipment?

What you are buying is a product that has been fully tested on many machines and RS232 communication devices & applications without any problems. There are different pinouts for RS232 that can sometimes make it difficult when it comes to setting up software for specific handshaking. With that being said this cable will work for a single computer to a CNC using XON/XOFF handshaking. RTS and CTS signals are jumped out. Fanuc cable A02b-0200-K814 replacement.

Having service engineers in the field of CNC's and automation we have been able to test this cable extensively and is standard for Fanuc and Mitsubishi controls.

Here is a list of the controls that we have tested this cable on.

• Fanuc- thoroughly tested on all controls
• Mitsubishi-all
• Siemens
• Haas
• Mazak
• Mori
• Brother

Many machine builders have front end controls as well such as Mazak, Mori with Fanuc or Mitsubishi controls in the back ground. This has been tested on many of these machines as well.

Specifications
This cable is 10ft long with a 9-pin female and 25-pin male connectors on either end. A02b-0200-K814

Some machines like Fadal and Prototrack require a DB25 Female connector please request cable with female or buy a DB25 female to DB25 female gender changer found here. A request may also be made to put the female connector on the DB25 side. 

We highly recommend ordering a LED tester if you do not have one with every cable to help troubleshoot your RS232 communications problems with your PC, cable or machine. Check out our RS232 Mini Tester LED

30 day warranty, Tech phone support and setup

Do you need a Custom RS232 cable? see our Custom RS232 cable.

Buy the RS232 Cable for your CNC communications now!