Highly Compatible 64mb Compact Flash card to install in PC card adapter to download programs and parameters from CNC Controls, PLCs, HMI or other devices.
A02B-0213-K2
Important considerations.
64mb may seem small for todays storage capabilities. However many older machines will not accept larger size disks. The limit for most older machines is 512mb, but there are some rare applications and hardware which require 64mb. CNC programs file sizes are usually relatively small as well as other program data typically stored inside parts like CNC's, HMI's and PLC's. So 64mb, 128mb, 256mb, 512mb cards provide the biggest range and compatibility across multiple platforms and different ages of controls. You may try larger capacity cards but machine may generate an alarm and not recognize the card.
*Note- this PC compact flash will work on most machines with newer controls from the past 7 years. Older machines will Require SRAM cards which have very small capacity usually less then 8MB and run on a different voltage. Has been tested on Fanuc controls including 16i/18i/21i and above and Newer Mistubshi controls. Make sure you set Device to channel 4 (fanuc) or it will not look for the card on fanuc controls.
Bookmark_Share