Compact flash adapter to PC card or PCMCIA card for Downloading programs using the Slot on your CNC control.
Tired of bringing your laptop out to the machine to load programs in via RS232?
This is what you need to make your life easier. If you have some of the newer machines, they will come equipped with a card slot under a cover on the front of the control. On Fanuc it is to the left of the screen ( A02B-0236-K150 PCMCIA adapter to Compact flash). Flip it open slide the card in and load your programs. This will work in place of a ATA card. Only difference is this is two pieces. Generall6 will work on Fanuc controls from year 2000 and up. Below requires SRAM cards which we offer.
Dimensions 86mm x 54mm (fits Fanuc and all type I and II slots)
Note: Does not come with the compact flash card. Must purchase separately - recommend 64mb CF Card for maximum compatibility. See 1GB CF Cards are also available but with not work on all compact flash compatible controls due to size.
This PCMCIA PC card adapter to compact flash works on many CNC controls including Fanuc A02B-0236-K150, Mitsubishi and more.