CHUCK-EEZ 21478 GREASE 16 oz. Cartridge Slipcoat
Some people think Chucks will last forever even without chuck grease - wrong! CHUCK-EEZ is a heavy-duty lubricant designed to increase the clamping pressure, provide lubrication and prevent abnormal wear of Power Chucks. Slipcoat Chuck Eez grease is the perfect fit for many lathe chuck grease applications. Chuck Eez grease is often used on Kitagawa chucks and many typical 3 jaw chucks on CNC's and other machinery.
Using CHUCK-EEZ Slipcoat Grease
Grease each chuck twice for every eight-hour shift, especially if a lot of coolant is used.
Two shots of CHUCK-EEZ is enough since the guideways cannot hold much grease.
Well known Kitagawa Chuck Grease 21478 chuck eez
Hand grease guns
Pneumatic grease equipment
CHUCK-EEZ may also be applied down to -20F using a brush with stiff bristles or by burnishing in with a clean cloth.
CHUCK-EEZ is a formulated power chuck lubricant to reduce:
Also prevents reduced friction under conditions of extreme pressure.
CHUCK-EEZ is able to withstand pressures up to 500,000 pounds per square inch.
12 Cartridges in a chuckeez case.
The tacky nature of this grease gives it high resistance to centrifugal force. Rust and oxidation inhibitors are added to provide rust protection during the life of the lubricant.
When stored under normal conditions, CHUCK EEZ has no known limits on useful life. If an oil layer forms on the top of the container - stir to mix.
Shipping Limitations: None,
Chuck Eez grease 21478
- Specialty Lubricants for your CNC. Slipcoat Chuck Eez grease is often used and sold by Kitagawa and used for Kitagawa Chucks. CNC Specialty is a distributor for Chuck-Eez and many other industrial greases.
Made in the USA